Extech Instruments EX710 User Manual page 10

General Specifications
Clamp jaw opening
Display
Continuity check
Diode test
Low Battery indication
Over-range indication
Measurement rate
PEAK
Input Impedance
AC bandwidth
Operating Temperature
Storage Temperature
Operating Humidity
Storage Humidity
Operating Altitude
Battery
Auto power OFF
Dimensions & Weight
Safety
30mm (1.2") approx.
3-3/4 digits (4000 counts) backlit LCD
Threshold 40Ω; Test current < 0.5mA
Test current of 0.3mA typical;
Open circuit voltage < 3VDC typical
'BAT' is displayed
'OL' display
2 readings per second, nominal
Captures peaks >1ms
10MΩ (VDC and VAC)
50 to 400Hz (AAC and VAC)
o o o
5 C to 40 C (41 F to 104
o o o
-20 C to 60 C (-4 F to 140
o
Max 80% up to 31 C (87
o
(104 F)
<80%
2000meters (7000ft). maximum.
One (1) 9V Battery
After approx. 25 minutes
229 x 80 x 49mm (9.0 x 3.1 x 2.0"); 303g (10.7 oz).
For indoor use and in accordance with the requirements for double
insulation to IEC1010-1 (2001): EN61010-1 (2001) Overvoltage
Category III 600V and Category II 1000V, Pollution Degree 2.
10
o
F)
o
F)
o
F) decreasing linearly to 50% at 40
o
C
EX710-EU-EN-V3.2-3/12