System Security - Prestigio Signore 152 Technical & Service Manual

TECHNICAL SERVICE MANUAL
Parameter
Parallel Port

System Security

The System Security screen contains parameters that help safeguard and protect your computer from
unauthorized use.
Information Information
Set Supervisor Password Set Supervisor Password
Set User Password Set User Password
Password on boot: Password on boot:
Set Primary Hard Disk Password Set Primary Hard Disk Password
F1 Help F1 Help
Esc Exit Esc Exit
The following table describes the parameters in this screen. Settings in boldface are the default and
suggested parameter settings.
Description
Enables or disable the parallel port.
The parallel port is a PnP device. Enabled/Disabled
setting won't affect the Windows Device Manager
setting of the parallel port.
Help: [Enabled]=User Configuration
[Disabled]=No Configuration
Mode: Set the mode for the parallel port using options.
If operation mode is set to ECP DMA Channel, sets
the direct memory access (DMA) channel for the
printer to operate in ECP mode. This parameter is
enabled only if operation mode is set to ECP.
Base I/O address: If operation mode is set to Base I/O
address, sets the base I/O address of the parallel port.
Interrupt: If operation mode is set to interrupt, sets the
interrupt request of the parallel port.
DMA Channel: Set a DMA channel for the printer to
operate in ECP mode. This parameter is enabled only
if the operation mode is set to ECP. Sets the DMA
channel for the parallel port.
PhoenixBIOS Setup Utility PhoenixBIOS Setup Utility
Main Main Advanced Advanced
[Enter] [Enter]
[Enter] [Enter]
[Disabled] [Disabled]
[Enter] [Enter]
Select Item Select Item F5/F6 Change Values F5/F6 Change Values
Select Menu Select Menu Enter Select Enter Select
Security Security
Supervisor Password controls Supervisor Password controls
access to the setup utility. access to the setup utility.
Sub-Menu Sub-Menu
35
Prestigio Signore 152
Options
Enabled or Disabled
1 or 3
ECP, Bi-directional, EPP, or
Output only
378, 3BC, or 278
7 or 5
DMA 3 or DMA 1
Boot Boot Exit Exit
Item Specific Help Item Specific Help
F9 Setup Defaults F9 Setup Defaults
F10 Save and Exit F10 Save and Exit