Setting A Password - Prestigio Signore 152 Technical & Service Manual

Prestigio Signore 152
Parameter
Set Supervisor Password
Set User Password
Password on boot
Set Primary Hard Disk
Password

Setting a Password

Follow these steps:
1. Use the cursor
Password on boot or Primary Hard Disk Password) and press the
as below if choosing Set Supervisor Password:
2. Type a password. The password may consist of up to eight characters (A-Z, a-z, 0-9) and then press
e
.
IMPORTANT:Be very careful when typing your password because the characters do not appear on the
screen.
3. Retype password to verify your first entry and then press
4. After setting the password, the computer automatically sets the chosen password parameter to Present.
^
5. Press to return to the main menu.
^
6. Press . The following dialogue box appears.
While entering SETUP, BIOS need to request user to enter
supervisor password if set.
This password protects the BIOS SETUP menu from
unauthorized entry.
During POST, BIOS need to check user password if set.
This password protects the system from unauthorized user
entry before OS boots up.
During POST, BIOS need to check hard disk password if set.
This password protects the computer from unauthorized entry
during boot-up.
Input HDD Password. When set, this password protects the
hard disk from unauthorized access. See the following section
for instructions on how to set a password.
w y
/ keys to highlight a Password parameter (Supervisor Password, User Password,
S e t S u p erv isor P a ss wo rd S e t S u p erv isor P a ss wo rd
E n te r N e w P a ss wo rd E n te r N e w P a ss wo rd
C on firm N e w P as sw o rd [ C on firm N e w P as sw o rd [
C ha n g es h av e be e n sa ve d . C ha n g es h av e be e n sa ve d .
Description
[ [
e
. The following screen appears:
S e tu p N o tice S e tu p N o tice
[C o ntinu e ] [C o ntinu e ]
36
TECHNICAL SERVICE MANUAL
Options
Enter
Enter
Disabled
Enter
e
key. The password box appears
] ]
] ]