Routes - Humminbird Onix Opeartion Manual

R
OUTES
Routes link two or more points together to create a path for navigation. A route represents your intended navigation and
shows the shortest path from each data point to the next. The distance between each route point is a route leg. You can
save 50 routes to the control head.
Route Points are stored latitude/longitude positions that connect to form route navigation.
Route Start Point
Route End Point
WARNING! You should always be aware of your surroundings and watch for any potential obstacles.
Quick Route Navigation
A Quick Route allows you to connect route points and waypoints and start navigation immediately. A Quick Route can be started with
the GO TO key or with the touch screen. Quick Routes can be saved or discarded. To create a saved route, see Create a Saved Route
or Manage your Navigation Data.
Start Quick Route Navigation
Touch Screen
1. Tap Chart in the status bar.
2. Select Go To.
3. Select Quick Route.
4. Tap the chart in the positions where you want to mark a
route point.
Undo Last Route Point: Tap the Back icon.
Cancel Route Creation: Tap the X icon.
5. To start navigation, tap the check icon in the status bar.

Routes

Keypad
1. Press the GO TO key.
2. Select Quick Route.
3. Use the Joystick to move the cursor to a position or
waypoint. Press the Joystick to mark the first route
point.
4. Repeat Step 3 to connect more than one route point.
Undo Last Route Point: Press the EXIT key once.
Cancel Route Creation: Press and hold the EXIT key.
5. To start navigation, press the ENTER key.
86