Humminbird Onix Opeartion Manual page 124

Change the Mosaic Display Position
The Mosaic will be displayed on-screen based on the Map Position setting. While you are recording a Mosaic, the Map Position
should be set to Auto.
1. From the Map Options menu, select Map Position.
2. Select Fixed or Auto.
Fixed
Auto
data outside the
display distance can
be shown using the
cursor position
Mosaic
The Mosaic is locked into the current position when Fixed is selected. The Mosaic will stay
fixed until you change the Map Position setting to Auto.
The Mosaic will move with the boat icon on-screen. If the cursor is active, the Mosaic data
closest to the cursor position will be displayed.
Auto: Data Displayed Closest to Boat Position
124
boat icon