Humminbird Onix Opeartion Manual page 33

Tips for Using the Status Bar
The status bar is located at the top of the screen. It changes to match the on-screen view and operation mode.
In the following illustrations, the information in the status bar corresponds with the Chart View displayed on-screen.
Press the MENU key to open the
X-Press Menu for the on-screen view
In Cross Touch models, you can tap the icon in the status bar to open a menu, return to the Home screen, close a menu, or make
a selection. You can also use the corresponding keys.
Tap to open the X-Press Menu for the on-screen view
Close a Menu
When you close a menu, your settings are saved until you change them again or until the control head defaults are restored.
1. Back: Tap the Back icon
back one level in the menu system.
OR
Press the EXIT key.
2. Close: Tap the X icon
OR
Press the EXIT key. To close several menus at once, press and
hold the EXIT key.
NOTE: The X icon is displayed in the status bar or at the top of a
menu. The location will vary with the item displayed on the
screen.
Status Bar (Non-Tactile)
displayed information changes to match the on-screen view and status
Status Bar (Cross Touch)
touch menus change to match the on-screen view and status
to close the current menu and go
.
Press the POWER key to open
Tap to open the Power X-Press Menu
33
sensor status
the Power X-Press Menu
sensor status
back close
The Menu System