Humminbird Onix Opeartion Manual page 11

Set Alarms
When an alarm is turned on, an alert will sound or display on the control head to indicate the threshold has been exceeded.
1. Press the HOME key. Select Alarms.
2. Under Settings, select Alarms.
If the control head is connected to the Humminbird network, select Local Alarms (control head only) or Networked Alarms
(alarms shared across control heads). See Set up your Humminbird Network for more information.
3. Select an alarm category.
4. Select an alarm name.
5. On/Off: Tap the on/off button, or press the ENTER key, to turn on the alarm.
6. Adjust the alarm threshold.
Touch Screen: Press and hold the slider, or drag the slider.
Keypad: Press and hold the ENTER key, or turn the Rotary dial.
7. Repeat steps 3 through 6 for each alarm you want to set.
NOTE: The touch menus in the status bar are only available in Cross Touch models. See The Menu System: Tips for Using the
Status Bar for details.
Setting an Alarm (Cross Touch)
selected category
11
home close status bar
menu
options
Getting Started