Humminbird Onix Opeartion Manual page 77

Quick Route
Nav Data
Lat/Long
Go To Cursor
When the Go To menu is opened during navigation, additional menu options are available, including the following:
Cancel
Navigation
Restart Course
Next Point
Reverse Route
Go To Menu Options
Select Quick Route to mark quick route points and start navigation. See Routes for more
information.
Open the Nav Data tool to select saved navigaton data and start navigation.
Open the on-screen keyboard to enter a latitude/longitude position. Select Go To to start
navigation to the position.
If the cursor is active, navigation will start to the cursor position.
Go To Menu Options (during navigation)
Select Cancel Navigation to cancel navigation with the control head.
Select Restart Course to start navigation from the current vessel position instead of from the
first route point. The control head will recalculate navigation to the next closest point in the
route. This is helpful if the boat has navigated off course from the current route.
Select Next Point to skip the current point and navigate to the next route point in the route.
Select Reverse Route to reverse the currently navigated route. Navigation will start from the
vessel position and continue in the opposite order.
77 Introduction to Navigation