The Back Panel - GE Calibur DVMR Triplex eZ User Manual

Digital video multiplexer recorder
Table of Contents

Advertisement

For instructions regarding the connection of the associated security equipment in your system, please
consult the instruction manual of the associated equipment.

1.7 The Back Panel

1
2
3
4
5
1. Camera Inputs: BNC connector, looping. Auto Terminating.
2. Composite Monitor-A Output: Composite video output with BNC style connector.
3. Y/C Monitor-A Output: Y/C video output with 4-pin mini-DIN style connector.
4. Alarm I/O: For connecting alarm inputs, and alarm output relays.
5. Power Input: For connecting the power supply.
6. RS485 Port 1 Connector: For connecting to keyboard and other RS485 devices.
7. 10/100 Ethernet Port: For connecting to remote PC via ethernet network.
8. Composite Monitor-B Output: Composite video output with BNC style connector.
9. Y/C Monitor-B Output: Y/C video output with 4-pin mini-DIN style connector.
10. SCSI Port: For connecting SCSI compatible archive devices.
11. RS232 Port 1: For modem connection and external control of the unit.
12. RS485 Port 2 Connector: For connecting to keyboard and other RS485 devices.
13. RS232 Port 2: For Event Generation and ASCII Text insertion.
Camera Inputs
There are two BNC jacks for each camera. Either
jack can receive a camera signal. The signal is
looped (directly connected to the other jack), making
the camera signal available to other equipment.
The camera input connectors are Auto Terminating.
This means that the input signal will automatically be terminated with 75-Ohms unless a 2
nd
connected to the 2
termination at the end of the video line if the signal is looped through the DVMR
Time base correction is performed during digital capture. As a result, cameras do not require
synchronization.
See section 3.13 for information about disabling unused camera jacks in the menu system.
0150-0198B
1
6
7
8
9
10
11
BNC connector of the same camera input. Make sure there is 75-Ohm
2
12
13
14
15
16
B
8
Cable: 75-Ohm Coaxial
Connectors: BNC
Auto Terminating: Yes
Passive Looping: Yes
9
3
4
5
12V DC
SVHS
SCSI
B
9
10
nd
e
Triplex eZ.
Calibur DVMR
6
7
ETHERNET
RS-485/1
10/100
RS-232/1
RS-485/2
RS-232/2
11
12
13
cable is
e
Triplex eZ

Advertisement

Table of Contents
loading

Table of Contents