After Completing Installation - Canon Laser Shot LBP3200 Getting Started Manual

IMPORTANT
Windows XP Service Pack 2 and other operating systems have the feature
that blocks unauthorized access over the network to protect your computer
(Windows Firewall). Because of this, you need to configure Windows
Firewall to allow access when you are using the printer on an operating
system that is equipped with Windows Firewall. (This configuration
operation is only needed when using the printer in a network
environment.)
For details, refer to the file "note_ex.pdf" that is included in the [English]
folder on the supplied "User Software for LBP3200" CD-ROM.
NOTE
If the installation of the printer driver is not complete properly, see Chapter
6 "Troubleshooting" in the User's Guide to uninstall the CAPT software,
then install it again.

After Completing Installation

When the installation of the CAPT software is completed, the icon and folder
for [Canon LBP3200] group will be created as follows:
■ For Windows 98/Me/2000
The [Canon LBP3200] printer icon will be displayed in the
•
[Printers] folder.
The shortcut of the [Canon LBP3200] folder will be displayed
•
on the desktop.
The [Canon LBP3200] group will be added into [Programs]
•
under the [Start] menu.
If you double-click the [Canon LBP3200] folder on the desktop, the icon for each
of [Canon LBP3200] group will be displayed.
Canon LBP3200 Uninstallation
•
Used if you want to uninstall the CAPT software
from your computer.
To start up, double-click the icon. (See Chapter 6
"Troubleshooting" in the User's Guide.)
Step
5
25