Canon Laser Shot LBP3200 Getting Started Manual page 23

9
Select [Automatic Detection (recommend)] and click [Next].
10
Click [OK], then press
" "
printer.
of the power switch to turn ON the
11
After installation is complete, click [OK].
NOTE
If the installation of the printer driver is not complete properly, see Chapter
6 "Troubleshooting" in the User's Guide to uninstall the CAPT software,
then install it again.
■ For Windows 2000/XP
NOTE
The screen shots used in this section are from Windows 2000.
1
Make sure that the power swich is turned OFF.
IMPORTANT
Do not turn ON the printer until procedural step 7 (➞ p. 24) during
installation procedure.
Step
5
23