Installation Site - Canon lbp5970 Getting Started Manual

Installation Site

Installation Environment
In order to use this printer in a safe and comfortable manner, install the printer in
a place that fulfills the following conditions.
IMPORTANT
Before installing the printer, be sure to read "Important Safety Instructions"
(See p. 7).
● Use power supplies rated for voltages in the following ranges.
220 to 240 V (± 10 %) 50/60 Hz (± 2 Hz)
● The maximum power consumption is 1,495 W or less.
Before connecting the printer to the power supply, make sure that the power
supply is safe and its voltage is stable.
● Use the printer in a location where the temperature and humidity are in the
following ranges.
Ambient temperature: 10 to 30°C (50 to 86°F)
Ambient humidity: 10 to 80 % RH (no condensation)
IMPORTANT
Water droplets (condensation) may form inside the printer under the
following circumstances. Leave the printer for two hours or more to adjust
to the surrounding temperature and humidity before using it. If water
droplets form inside the printer, the paper transport path will not function
properly, and this may result in paper jams, damage to the printer, or
printer error.
- When the room where the printer is installed is heated rapidly
- When the printer is moved from a cool or dry location to a hot or humid
location
NOTE
To customers using an ultrasonic humidifier
If you use an ultrasonic humidifier in conjunction with tap water or well
water, impurities in the water will be dispersed through the air. These can
be trapped inside the printer, causing degradations in printing quality.
When you are using these humidifiers, it is therefore recommended that
you use purified water or other water that is free of impurities.
Downloaded from ManualsPrinter.com Manuals
● Install the printer in the following locations.
- A location where sufficient space can be secured
- A well-ventilated room
- A flat, even surface
- A sturdy platform that can easily support the weight of the printer and optional
accessories
WARNING
Do not install the printer near alcohol, paint thinner, or other
flammable substances. If flammable substances come into contact
with electrical parts inside the printer, it may result in a fire or
electrical shock.
CAUTION
•
Do not install the printer in the following locations, as this may result
in a fire or electrical shock.
- A damp or dusty location
- A location exposed to smoke and steam such as cookeries and
humidifiers
- A location exposed to rain or snow
- A location near water faucets or water
- A location exposed to direct sunlight
- A location subject to high temperatures
- A location near open flames
•
The weight of the printers is as follows.
With the toner
Default cartridges and drum
cartridges installed
Approx. 48.5 kg Approx. 57.4 kg
Be sure to install the printer on a sturdy platform that can easily
support the weight of the printer and optional accessories. Do not
install the printer in unstable locations, such as unsteady platforms
or inclined floors, in locations subject to excessive vibrations, or on
the upper row of a computer rack, as this may cause the printer to fall
or tip over, resulting in personal injury.
IMPORTANT
Do not install the printer in the following locations, as this may result in
damage to the printer.
With the optional paper
feeders (3 units)
installed
Approx. 90.4 kg
5