Using The Adjustment Program; Top Margin Adjustment; First Dot Position Adjustment - Epson Stylus C110 Service Manual

EPSON Stylus C110/C120/D120

5.2 Using the Adjustment Program

This section describes how to judge the adjustment patterns printed by the Adjustment
Program. For information on how to operate the Adjustment Program, see the
instructions displayed by the Adjustment Program.

5.2.1 TOP Margin Adjustment

The following pattern is printed.
-7 -6-5 -4-3 -2-1 0 1 2 3 4 5 6 7
Figure 5-1. Top Margin Adjustment Printout Pattern
How to Judge
Measure the length from the top edge of the paper to the printed line. Enter the value
for the line that is exactly 3 mm away from the top edge.
ADJUSTMENT
3mm
Using the Adjustment Program

5.2.2 First Dot Position Adjustment

The following pattern is printed.
-7
-6
-5
-4
5mm
-3
-2
-1
0
1
2
3
4
5
6
7
Figure 5-2. Fist Dot Position Adjustment Printout Pattern
How to judge
Measure the length from the left edge of the paper to the printed line. Enter the value
for the line that is exactly 5 mm away from the left edge.
Revision B
112