EPSON Stylus C110/C120/D120
Occurrence timing
Detailed phenomenon
CR position
After both surfaces were printed, the
• Operation
paper was ejected but an error is
•
–
displayed.
TROUBLESHOOTING
Table 3-10. Check point for double feed error according to each phenomenon
Defective unit/
part name
1. Check if the Extension Spring Retard operates correctly
in the paper loading sequence.
ASF Unit
2. Check if the Paper Back Lever operates correctly in the
paper loading sequence.
Troubleshooting
Check point
Backside of ASF
Extension Spring Retard
Extension Spring 6.45
Paper Back Lever
Revision B
Remedy
1. Set the Extension Spring Retard between the
Retard Roller Unit and the ASF Frame.
2. Set the Extension Spring 6.45 between the ASF
Frame and the Paper Back Lever.
60