Installation Requirements; Package Contents - Ubiquiti UAP-PRO UNIFI Quick Start Manual

Introduction
Thank you for purchasing the Ubiquiti Networks
Enterprise WiFi System. This system includes the UniFi
Controller software, which allows you to manage your wireless
network using a web browser. The UniFi Controller software is
available for download at downloads.ubnt.com/unifi
This Quick Start Guide includes the warranty terms and is for
use with the UniFi AP-PRO, model: UAP-PRO.

Installation Requirements

• CAT5/6 cable
• Phillips screwdriver
• Drill and drill bit: 6 mm (¼ for wall-mounting or mm (1⁄8")
for ceiling-mounting
• Optional: Drywall or keyhole saw to cut 25 mm (1 in) hole for
Ethernet cable feed

Package Contents

UniFi AP-PRO
Flat Head Screws
(M3x50, Qty. 3)
PoE GigE Adapter
(48V, 0.5A Gigabit)
TERMS OF USE: All Ethernet cabling runs must use CAT5 (or above). It is the customer's
responsibility to follow local country regulations, including operation within legal frequency
channels, output power, indoor cabling requirements, and Dynamic Frequency Selection
(DFS) requirements.
Mounting Bracket
Keps Nuts
(M3, Qty. 3) (M2.9x20, Qty. 3)
Power Cord
UniFi®
™
Ceiling Backing Plate
Screws Screw Anchors
(M3x20, Qty. 3)
Enterprise WiFi System rise WiFi System
Models: UAP-PRO AP-PRO
Quick Start Guide