WAGNER ProSpray 3.25 Operating Manual page 2

Airless units develop extremely high spraying pressures.
Never put your fingers, hands or any other parts
1
of the body into the spray jet!
Never point the spray gun at yourself, other persons or animals.
Never use the spray gun without safety guard.
Do not treat a spraying injury as a harmless cut. In case of
injury to the skin through coating materials or solvents,
consult a doctor immediately for quick and expert treatment.
Inform the doctor about the coating material or solvent used.
The operating instructions state that the following points must always be
2
observed before starting up.
1.
2.
3. Ensure that the unit is properly earthed. The
4. Check allowable operating pressure of high-pressure hose
5. Check all connections for leaks.
3 The instructions regarding regular cleaning and maintenance
of the unit must be strictly observed.
Before any work is done on the unit or for every break in
work the following rules must be observed:
1. Release the pressure from
2. Secure the Titan spray gun using
3. Switch off unit.
Be safety-conscious!
Uncontrolled Copy
Warning!
Attention: Danger of injury by injection!
Faulty units must not be used.
Secure Titan spray gun using the safety catch on the trigger.
connection must take place through a correctly
earthed two-pole and earth socket outlet.
and spray gun.
spray gun and hose.
the safety catch on the trigger
GB
2
PE
0 bar
ProSpray 3.25