Utility Setup - Digital ID View IV-411ECO User Manual

4-9 UTILITY SETUP

Item
HDD Initialization
USB Initialization
System Recovery
Reset System Events
Copy Setup to USB
Download Setup from USB
Upgrade
Notice! DO NOT TURN OFF POWER OR UNPLUG USB DEVICE DURING THE UPGRADE
as it may cause incomplete firmware upgrade and damage to the DVR.
2009.12.14 IV-411ECO/IV-811ECO/IV-1611ECO User Manual V0.4(N02)
Description
Select to enter hard disk initialization menu. Please stop
recording before entering this menu. Enter the menu,
system will show all the data (model ,volume ) of HDD that
installed in DVR. Check the HDD you'd like to initialize
then press "Start". HDD initialization is successful when
the status shows "Succeed"
Clean up all data on USB. Enter USB initialization and
press YES to clean up all data on your USB. The
initialization is done when it shows "Succeed".
Restore system default values
Reset all the recording events in DVR.
Copy configuration to a USB device. There will be a file
named 「sdvr_conf.dat」 on your USB.
Download configuration from a USB device into DVR.
Upgrade DVR through USB.
Please stop recording and backup setup configuration
before upgrading.
System will reboot automatically when the upgrade is
completed.
38