4-2.1 Motion Setup; 4-2.1.1 Motion Area Setup - Digital ID View IV-411ECO User Manual

4-2.1 MOTION SETUP

Item
Alarm Duration(Seconds)
Motion Popup
1~16
Enable
Sensitivity
Motion Area Setup

4-2.1.1 MOTION AREA SETUP

The motion detection has been divided into 16x12 grids. The default detection area is
full screen as it marked in transparent for local DVR and purple for remote access.
Areas deselected for motion detection are marked in red for both local and remote site.
2009.12.14 IV-411ECO/IV-811ECO/IV-1611ECO User Manual V0.4(N02)
When motion detect，the number of seconds continuous alarm
Check the box to Enable/Disable popup screen function for all
channels. When motion is detected in LIVE mode, the detected
channel image will pop up in full screen display.
You can setup independently for each channel.
Check the box to Enable/Disable motion detection for each channel.
Drag the white bar or press ◀ ▶ to set up Sensitivity from value
1 to 10 for each channel. The lower value you set the higher
sensitivity it will be
Enter to setup motion detection area
Description
23