Ptz Mode - Digital ID View IV-411ECO User Manual

3-3 PTZ Mode

Switch to the PTZ mode by pressing "PTZ" button under the LIVE mode. The PTZ icon
will appear on upper left side of screen and the control panel will appear on the down right side
of screen.
Table 3-3.1 Remote Control functions under the PTZ mode
Button
/ SLOW Move PTZ up.
Move PTZ down.
/
/ Move PTZ to the left.
/ Move PTZ to the right.
PTZ zoom-in.
ZOOM +
ZOOM - PTZ zoom-out.
FOCUS + PTZ focus-in.
PTZ focus-out.
FOCUS -
IRIS + PTZ iris-open.
IRIS - PTZ iris-close.
Activate PTZ pre-set tour.
TOUR
Setup the Preset location
PRESET+
Press "PRESET" key first then two-digit number; DVR will set the current
Number
PTZ location at entered preset number.
Go to Preset location
PLAY+
Press "PLAY" key first then two-digit number, PTZ will go to the
Number
correspondent preset number location.
Set current PTZ location as the start of line-scan.
PIP
Activate auto line-scan.
FREEZE
Set current PTZ location as the end of
ZOOM
＊ PTZ communication protocols from different brands aren't compatible 100% sometime
s. Therefore, some of these functions may be unavailable.
2009.12.14 IV-411ECO/IV-811ECO/IV-1611ECO User Manual V0.4(N02)
Description
＊
＊
line-scan.＊
＊
18