Table of Contents
Advertisement
Item
Enable PTZ
Protocol
PTZ ID
Baud Rate
RS-485 ID
RS-485 Baud Rate
Keyboard
Note：4CH DVR will display 4 channels and 8CH DVR will display 8 channels.
4-8 SYSTEM SETUP
Item
DVR Name
The name of DVR will be shown when users login from remote access.
DVR Location
The location of DVR will be shown when users login from remote access
Click or press ▼ to select OSD language from English, Traditional
Language
Chinese, Simplified Chinese, Japanese, Greek, Portuguese
Default ID is 1. When DVR is controlled by standard remote control,
please press "DVR1＊" before using it. When more than one DVRs
Remote ID
are purchased, the DVRs can be numbered from 1 to 4. For
instance, standard remote control can't operate DVR numbered 3. It
only responds when "DVR3" button has been pressed beforehand.
Display Setup
Enter to set up Display
Date/Time Setup
Enter to set up Date/Time
Enter to set up Buzzer & Relay
Device Setup
Enter to set up Spot
Spot Setup
＊ Default ID is ID1. If remote control malfunctions, please press, "DVR1" button to
renew corresponding DVR ID.
2009.12.14 IV-411ECO/IV-811ECO/IV-1611ECO User Manual V0.4(N02)
Click the box to Enable/Disable PTZ function for each channel.
Set up the protocol of PTZ cam. The supported protocol are
PELCO-P, PELCO-D, KND, LI-LIN, SAMSUNG, LG, AVTECH.
◀ ▶
Click or press
to set up PTZ ID. The valid ID value is from 1
to 64.
Select Baud Rate for PTZ from 2400, 4800, 9600,19200
Select RS-485 ID from 1 to 64
Select RS-485 Baud Rate from 2400. 4800, 9600,19200
Select Keyboard. (Li-Lin)
Description
Description
33
Advertisement
Table of Contents
