Table of Contents
Advertisement
Item
Enable E-mail Notification
SMTP Server
User Name
Password
Sender E-mail
Trigger Event
Receiver E-mail
4-7 PTZ & RS485 SETUP
The DVR allows users to control PTZ functions of your camera. To enable PTZ function, the 485
cable should be connected to the RS-485 port of DVR.
2009.12.14 IV-411ECO/IV-811ECO/IV-1611ECO User Manual V0.4(N02)
Check the box to enable/disable E-mal Notification function.
Enter to set up SMTP Server name.
(Varies according to the user)
Enter to set up User Name.
Enter to set up Password.
Enter to set up e-mail address of receivers.
Enter to select events to send out E-mail notifications when below
circumstances happen: Motion, Sensor and Vloss (Video Loss).
Enter to set up e-mail addresses for up to 10 receivers individually.
Description
32
Advertisement
Table of Contents
