Subscribe to Our Youtube Channel
Related Manuals for Digital ID View IV-MX4POENVR
Summary of Contents for Digital ID View IV-MX4POENVR
- Page 1 User Manual V1.0 ─ NVR ─ 12000 Ford Rd, Suite 110, Dallas, TX 75234 www.idview.com Notice: This content is subject to be change without notice.
- Page 2 WARNING TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. NOTE: This equipment has been tested and found to comply with the limits for a class digital device, pursuant to part 15 of the FCC Rules.
-
Page 3: Table Of Contents
Table of Contents Chapter 1 LIVE OPERATIONS ....................5 Chapter 2 MAIN MENU SETUP .................... 7 2-1 Auto Sequential ......................10 2-2 Backup ........................11 2-2.1 Selection ......................11 2-2.2 Select Backup Device ................... 12 2-3 Configure ........................13 2-4 Time Search ........................ 14 2-5 System Logs ....................... - Page 4 3-6 Storage Setup ......................51 3-6.1 HDD Setup ....................... 51 3-6.2 USB Flash Derive Setup ................52 3-6.3 DVD-RW Setup ....................52 3-7 System Setup ......................53 3-7.1 Auto Lock ......................53 3-7.2 Auto Reboot ....................53 3-7.3 Date/Time Setup ..................... 54 3-7.3.1 Time zone ______________________________________________ 54 3-7.3.2 Daylight Saving Time Setup ..................
-
Page 5: Chapter 1 Live Operations
Note： The number of channels, sensors, relays, and split screen, and the resolution in the following figures are for reference. The actual screen output may be different by dif- ferent models. Chapter 1 LIVE OPERATIONS In the live mode, you may monitor all channels of the DVR, listen to live audio from cameras, and configure the DVR. - Page 6 Table 1-1 Icon description in live mode Icon Description Recording of a channel is activated. Live audio of a channel is activated. Live audio of a channel is not activated. Video signal of a channel is available. Event recording of a channel is active in this channel.
-
Page 7: Chapter 2 Main Menu Setup
Chapter 2 MAIN MENU SETUP To enter the main menu and set up a DVR, log-in account and user password are required. The default password of the administrator is “123456”. Please check the “Account Setup” for management of other log-in users. Table 2-1 Definition of keys of virtual keyboard Icon Description... - Page 8 There are icons within the configuration pane on the live mode to operate different features of the DVR.
- Page 9 Table 2- 3 Description of icons Icon Description Set the auto sequential menu Set the backup menu to backup video data from DVR HDD. Set the configuration menu to access recording settings, event settings, camera settings, account settings, network settings, storage settings, system configuration, and information Set the time search menu to choose a specific time of the recorded video to playback...
-
Page 10: Auto Sequential
Switch to 13-split display Switch to 16-split display Switch to 20-split display Switch to 25-split display Switch to 32-split display 2-1 Auto Sequential... -
Page 11: Backup
Item Description Interval The time interval between each channel display The DVR automatically switches between channels with designated All Channels interval. The DVR shows each channel in a single-split mode. Quad-Screen Divi- The DVR automatically switches between channels with designated sion interval. -
Page 12: 2-2.2 Select Backup Device
2-2.2 Select Backup Device Item Description Select target device of backup (USB/DVD-RW/remote folder) 。 Backup Device Status The status of target backup device The available space in the target backup device. (not available for Free Space remote folder backup) Start backup operation. Be sure to calculate the size of backup file BEFORE operating Backup backup. -
Page 13: Configure
Do not unplug the USB device or turn off the DVR during the backup process to avoid unrecoverable error. 2-3 Configure Evoke the configuration menu, recording settings, event settings, camera set- tings, account settings, network settings, storage settings, system configuration, and information. -
Page 14: Time Search
2-4 Time Search Time search can search for the specific time of recorded data to playback. Note that dates with recording data are marked with a blue box. System will start playing video of specified time slot. Calendar will be shown by using mouse to click on “year”... - Page 15 Playback configuration Table 2-4 Available keys on the remote control functions in the PLAYBACK mode Button Description ENTER/ MODE Switch to full screen or multi split display. MENU / Turn on/off PAUSE. PLAY Playback at normal speed. Playback at slower speed. The speed will be slowed to 1/2, 1/4, 1/8 / SLOW playback speed, by each pressing of the button till the slowest speed.
- Page 16 Slow playback, speed 1/2x, 1/4x, 1/8x Step playback Zoom-in display, 2x~8x digital zoom Full screen display Quad display 9 screen display 16 screen display Switch to 20-split display Switch to 25-split display Switch to 32-split display If you want to monitor single channel, please double-click the preferred channel.
-
Page 17: System Logs
P.S Can drag a small window 2-5 System Logs The DVR logs events automatically. The event list shows the logged events, event type, event detail, event filter (criteria), and page number of the event list. If the event video is logged, there is a gray video symbol "►" on the left of the event. -
Page 18: 2-5.1 Search Criteria
2-5.1 Search Criteria The number of event is up to thousands, therefore, to set "search criteria" to facilitate rapid classification of events. If the checkbox of start time and end time is checked, the event list will only display the events within the specific time slot. If the user unchecks some events and press the "OK ", the lists will only shows checked events. -
Page 19: Ptz Operation
2-6 PTZ Operation Set up the camera PTZ settings in advance (refer to 3-3.1). Enter the PTZ con- figuration page, PTZ control panel displays the camera PTZ setting. There is a red cross on the center of the screen. Move the mouse to the Red Cross and hold down the left mouse button to the preferred location of the screen. -
Page 20: Zoom
location to default point. Press left and right arrow keys to move the camera to the preset locations, and then press to change the cam- era to next preset point. Rotate Video Make the display upside down 2-7 Zoom In the digital zoom mode, users may use the mouse to move the red rectangle of the zoom area. -
Page 21: Shortcut Toolbar
2-8 Shortcut toolbar Real-time monitoring mode, move your mouse over the window function column appears above its fast operation ICON Description User login / logout: Auto lock is used. System Information: The host model, version, IP location, MAC values and hard disk information. Wide screen switching: Switch 4:3 / 16:9 monitor display. - Page 22 2-8.1 network image quality Option Description Low Quality Single Im- Low quality static mode: insufficient bandwidth used for one second about running 1 ~ 2FPS. Low quality Dynamic mode: According to the DVR recording Low quality settings. High-definition single image under static mode: insufficient High-quality bandwidth to use for one second about running 1 ~ 2FPS.
- Page 23 2-8.3 Popup Setup Item Description Prompt window displays the channel status。 Event Display time, HDD status, channel information, channel border. 2-8.4 Relay Setup Option Description Relay Relay 1 ~ 4 J Series x1, N Series x2, B Series x4. Functional open, close, automatically...
-
Page 24: Chapter 3 Configuration Menu
Chapter 3 CONFIGURATION MENU PS. The initialization of new-installed HD is required before recording, please refer to “UTILITY SETUP” for detail. 3-1 Record Setup Item Description Record Mode Continuous Record/ Schedule Record/ Stop Record... -
Page 25: 3-1.1 Continuous Record
3-1.1 Continuous Record Item Description Click icon, it will go to the video setting menu of this channel (be- Video low). In settings menu, press to save, press to go back to the original video settings menu Record Enable / Disable recording for this channel Recording resolution selection Resolution Select recording frame rate, from 1 to 30... -
Page 26: 3-1.1.1 Video Settings
3-1.1.1 Video Settings 16:9 display video settings 4:3 display video settings Item Description Sharpness Adjust sharpness from 0 to 255 Brightness Adjust brightness from 0 to 255 Adjust contrast from 0 to 255 Contrast Adjust saturation from 0 to 255 Saturation Adjust hue from 0 to 255 Volume... -
Page 27: 3-1.1.2 Event Recording
3-1.1.2 Event Recording Item Description Record Enable / Disable recording of a channel Resolution Recording resolution selection Select recording frame rate from 1 to 30 Recording quality from 10 to 100. The larger number means the Quality better quality Pre-Alarm Set the record seconds before the event, from 0 to 5. -
Page 28: 3-1.2 Schedule Recording
3-1.2 Schedule Recording Schedule recording can configure recording time by days of a week and hour. With the A, B, C, D four settings, users can set different recording scheme ac- cording to different configuration needs. In the day and time grid map, select the schedule time zone, and then press A, B, C, D one of the buttons to specify the video settings. -
Page 29: 3-1.2.1 Configuration
3-1.2.1 Configuration Item Description Name Change the recording name of the channel For the rest, please refer to 3-1.1 Continuous Record 3-1.2.2 Holiday Configuration The number of holiday is up to 50. When the time comes to the specified holi- days, the IVR will start recording according to holiday configuration. -
Page 30: Event Setup
3-2 Event Setup 3-2.1 Video Loss 3-2.1.1 Configuration Item Description Enable Enable / Disable video loss detection function 3-2.1.2 Event Handling Item Description Write to event log when the video loss event happens. Select channel for event recording when event occurs. The video setup corresponds to the "Configuration →... -
Page 31: 3-2.1.3Receiver Setup
3-2.1.3Receiver Setup Item Description Specify whether the IVR sends e-mail notice to specified users Enable when an event occurs. Admin / Users Specify the receiver of e-mail notices 3-2.2 Motion Detection 3-2.2.1 Configuration Item Description Enable Enable / Disable the motion detection function of this channel The sensitivity value is from 0 to 100. -
Page 32: 3-2.2.1.1 Motion Area Setup
3-2.2.1.1 Motion Area Setup The motion detection has been divided into 22 x18 grids. The default detection area is full screen. The screen is marked in transparent for detection area and grey for disabled area of motion detection. Item Description Selected channel motion detection function。... -
Page 33: 3-2.3 Sensor
3-2.3 Sensor ※ Each sensor name can be modified and remotely can enter various lan- guages 3-2.3.1 Configuration Item Description Enable Enable/Disable sensor N.C: Sensor has not been triggered. When connected, sensor will be turned on Polarity N.O: Sensor has been triggered. When connected, sensor status will be turned off 3-2.3.2 Event Handling Event Handling... -
Page 34: 3-2.3.3 Receiver Setup
3-2.3.3 Receiver Setup Receiver Setup Please refer to 3-2.1.3 3-2.4 System When the system event occurs, give a notice or warning according to the set- tings of relay, buzzer, and receiver. If the buzzer box is checked, the buzzer continually beeps for only errors related to the video (such as hard drives can’t write or not install the hard drive). -
Page 35: Camera Setup
3-3 Camera Setup Item Description Check the box to Enable/Disable mask function for the camera in Mask the LIVE mode Name Channel name Timestamp Click on the blue screen to set position of the timestamp. Default is “Auto”. Press the drop-down menu to choose a video formats of your camera if the image is abnormal. -
Page 36: 3-3.1 Ip Mode Setup
3-3.1 IP Mode Setup Remote Connection It must be selected to active IP mode Camera Set Searching IP cam or DVR in the same segment of Network Protocol Select protocol of IP-based devices. ONVIF protocol is supported IP address of remote device Port Which port allocate in the IP address. - Page 37 Please wait awhile, IP CAM in the same network area are going to be added in the to p of sheet and press “+” to add it to the selection list below. Press “reload” sign in the top right corner to re-search again if there is no device or (a) new added device(s) Step 2-2.
- Page 38 Dual Stream, also called “Main Stream”, is higher resolution video stream from the remote for better video quality. Single Stream, also called “Sub Stream”, is lower video resolution from the remote for transferring video easily. Step 4, choose one remote device from the drop-down menu.
- Page 39 Step 5, Press “OK” to leave...
-
Page 40: 3-3.2 Ptz Setup
3-3.2 PTZ Setup Item Description Enable Click the box to Enable/Disable PTZ function. Protocol Set up the protocol of PTZ cam. The supported protocol are: PELCO-D、PELCO-P、Merit LiLin 1、Merit LiLin 2、SAMSUNG、 LG-MultixE PTZ ID Set up PTZ ID. The valid ID value is from 0 to 255. Baud Rate Select Baud Rate of PTZ control protocol from 2400, 4800, 9600,19200... -
Page 41: Account Setup
3-4 Account Setup You can set the user password and permissions of 10 user accounts (1 admin + 10 users). These different accounts gives users different permissions of IVR features. 3-4.1 Administrator The default admin account and password is “admin” and “123456” Item Description Check to activate the user’s account. -
Page 42: 3-4.2 Other Users
Name Set up the username Set up the password. The password can be mixed of letters and Password numbers and is case-sensitive. e-Mail Set up user email 3-4.2 Other Users Item Description Check to activate the user’s account. Enable Expire Set the expiration date of the user account Name Set up username... -
Page 43: Network Setup
※ use of local, remote permissions, respectively, the option must be checked, otherwise it will not work 3-5 Network Setup Item Description DHCP The DVR retrieves from a DHCP server automatically. Static IP Set up a Static IP address of the IVR. PPPoE Set up the username and password for PPPoE connection. -
Page 44: 3-5.1 Networking Setup
3-5.1 Networking Setup There are three ways to connect to the network. 3-5.1.1 DHCP Setup When DHCP is selected, IP address will be assigned by DHCP server automatically. Notice: The IP address shown in this page is not the IP address obtained from the DHCP server. The IP obtained from the DHCP server is shown in the System Information Page. -
Page 45: 3-5.1.3 Pppoe Setup
(Note: The correct DNS address must be entered for DDNS function). 3-5.1.3 PPPoE Setup Select PPPoE for network connection, the following information is required. Item Description Enable Enable / Disable PPPoE function。 User Enter user name provided by ISP Password Enter password provided by ISP 3-5.1.4 3G Setup Using the USB 3G dongle to access the network... -
Page 46: 3-5.1.5 Bandwidth Limited
Item Description Enable Enable / Disable 3G function. Dial Number Dial-up Number, offer by the ISP Enter SIM card password Enter “internet” or other value offered by the ISP. User Enter ISP username Password Enter ISP password 3-5.1.5 Bandwidth Limited Option Description Bandwidth... -
Page 47: 3-5.2 Ddns Setup
HTTP Setup Item Description Enable Check to enable HTTP server. Users can remotely access into the IVR over the network if the HTTP function is activated. Port Enter a valid port value from 1 up to 65535. The default value is 80. Input P2P Access Key for P2P Apply Key 3-5.2 DDNS Setup... -
Page 48: 3-5.3 Ntp Setup
Item Description Enable Enable / Disable DDNS function. Enter the registered DDNS Server: Server ez- dns.com、i-dvr.net、dyndns.org ez- dns.com、i-dvr.net Supports automatic assignment DDNS When these two DDNS service, The system will automatically bring up to C + DVR Mac Address last six yards at the beginning of a host site, Such as the Mac end of the six yards of FD5CCD, Then bring out the host site at CFD5CCD.i-dvr.net or CFD5CCD.ez-dns.com... -
Page 49: 3-5.4 Mail Setup
3-5.4 Mail Setup The Mail Setup tab controls the email-sending configuration when the IVR needs to send e-mail to specified users. Item Description Enable Check the box to enable/disable E-mail Notification function SMTP Server Set up SMTP Server name and port User Enter to set up the username. -
Page 50: 3-5.5 Ftp Setup
3-5.5 FTP Setup Item Description Enable Check the box to enable/disable FTP function Server Set up FTP Server name and port Enter to set up the username. User Password Enter to set up the password. Directory Upload FTP directory path... -
Page 51: Storage Setup
3-6 Storage Setup 3-6.1 HDD Setup ※ Click the status bar to change the attributes of the hard disk Item Description Video Preservation Setup the video preservation period. Recorded video will be de- (Hours) leted automatically after expiry of preservation period. Model Display HDD model Status... -
Page 52: 3-6.2 Usb Flash Derive Setup
3-6.2 USB Flash Derive Setup Item Description Model Display USB flash drive model Free/Capacity Display USB flash drive capacity (Free/Capacity ) 3-6.3 DVD-RW Setup Item Description Model Display DVD-RW model Media Type Display disk type Free/Capacity Display DVD-RW capacity (Free/Capacity ) -
Page 53: System Setup
3-7 System Setup Item Description IVR Name The name of IVR to be shown while users login from remote site. Language Specify the OSD language. Video Format Detec- Specify the format of video signal (auto-detect, NTSC, PAL). The tion configuration requires DVR reboot to take effect 3-7.1 Auto Lock Item Description... -
Page 54: 3-7.3 Date/Time Setup
3-7.3 Date/Time Setup Item Description Hour Format 12HOURS/ 24HOURS Date Format MM-DD-YY/DD-MM-YY/YY-MM-DD 3-7.3.1 Time zone Item Description Time Zone Setup Set up the time zone of the IVR, from GMT - 13 ～ GMT+ 13。 Daylight Saving Time Enable / Disable Daylight Saving Time 3-7.3.2 Daylight Saving Time Setup Item Description... -
Page 55: 3-7.3.3 Change Date And Time
3-7.3.3 Change Date and Time Setup date and time of the IVR. -
Page 56: 3-7.4 Monitor Setup
3-7.4 Monitor Setup This feature is only support "Maya v2" series models. Users have to decide which one is the main screen, which is the second screen. In the setting can be used when there are three configurations. In duplicate mode, both monitors display the same content. In the HDMI (1) VGA (2) mode, HDMI will be the screen 1, VGA will be the screen 2. - Page 57 Monitor setup Item Description set the main screen (1), the second screen (2) screen display setup 1、2 menu Resolution selection screen resolution Border Color Set the color of border Luminance Setting brightness, from 0 to 100. Contract Setting screen display color contrast, from 0 to 100. Saturation Setting screen display color saturation from 0 to 100.
-
Page 58: 3-7.5 Input Setup
3-7.5 Input Setup The Input Setup allows users’ setup input device (Key Tone, Remote control, Panel, Mouse, Keyboard, Touch screen). Item Description Key Tone Enable / Disable Key Tone. 3-7.5.1 Remote Control Setup Item Description Enable Enable / Disable remote control. Default ID is 0. -
Page 59: 3-7.5.2 Panel Setup
3-7.5.2 Panel Setup Item Description Test Enable / Disable panel button test function. Press Key Display information of the pressed key. 3-7.5.3 Mouse Setup Item Description Setup the mouse cursor speed. The right side of the slider means Speed faster mouse speed. (Only valid for local configuration) -
Page 60: 3-7.5.5 Touch Screen Setup
3-7.5.4 PTZ Keyboard Setup Item Description RS-485 ID RS-485 ID, valid values range from 1 to 64 RS-485 Baud rate RS-485 Baud rate from 2400, 4800, 9600, 19200 Keyboard Select PTZ Keyboard Test Enable / Disable keyboard test function Press Key Display press key information 3-7.5.5 Touch Screen Setup Detects the touch screen... -
Page 61: 3-7.6 Utility Setup
3-7.6 Utility Setup Item Description Export Configuration Export IVR configuration to a USB flash drive or a remote PC. Import Configuration Import configuration from a USB flash drive or a remote PC to IVR. Reset Configuration Reset system configuration. Export Logs Save IVR system log to a USB flash drive or a remote PC. -
Page 62: 3-7.6.1 Export Configuration
3-7.6.1 Export Configuration There are several options for target storage of IVR configuration. a. Export to a USB Flash Drive: The default filename is “dvr.cfg” b. Save *.cfg as PC... -
Page 63: 3-7.6.2 Import Configuration
3-7.6.2 Import Configuration Import configuration to the IVR from a USB drive or a remote computer. a. Import from USB Flash Drive: Import the configuration from a USB flash drive. b. Open *.cfg from PC... -
Page 64: 3-7.6.3 Reset Configuration
3-7.6.3 Reset Configuration Reset the IVR to default settings. 3-7.6.4 Export Logs a. Export to USB Flash Drive: Export logs to a USB flash drive. The default file name is “log.csv” b.Save *.csv as PC... -
Page 65: 3-7.6.5 Clear Logs
3-7.6.5 Clear Logs Clear the system logs. -
Page 66: 3-7.6.6 Upgrade Firmware
3-7.6.6 Upgrade Firmware Notice! DO NOT TURN OFF POWER OR UNPLUG USB DEVICE DURING THE UPGRADE because that may cause incomplete firmware upgrade and damage the IVR. a. Upgrade from USB Flash Drive...: Choose the firmware from USB flash drive to upgrade b. -
Page 67: System Information
3-8 System Information 3-8.1 IVR Information Item Description Model IVR model name and video type Version IVR firmware version 3-8.2 Network Information Item Description IVR IP address If there is no network connection, it will show "Network is not con- nected. -
Page 68: 3-8.4 S.m.a.r.t Information
3-8.4 S.M.A.R.T Information... -
Page 69: Remote Software Installation And Setup
REMOTE SOFTWARE INSTALLATION and SETUP The IVR allows users remotely access and control the DVR from a PC by 「iWatchDVR」or IE v6.0 or above. p.s. The DVR currently supports Windows 7、Windows 8/8.1、Windows 10. Application Software Connection Step 1： Enter the IP address of IVR in IE browser. Step 2：... - Page 70 iWatchDVR for Windows XP/Vista/7/8” Step 3 ： Click on the link ” to start downloading the AP software. Step 4： The program can be run directly, or save the program to the remote PC and execute later. If you choose to run the software, Start window will be shown up. Please enter information of login IVR: IP, Port, Username and Password.
- Page 71 he drop-down menu can be used to record IP address. Press “Clear” to clear IP address. You’ve logged into the IVR Step 5：...
-
Page 72: Ie Connection
3-10 IE Connection Step 1： Enter the IP address of IVR in IE browser. The address appeared in this image is only for demonstration. Actual address is depending on the setup of on-site IVR Step 2： Windows as below will show up. Please enter the user name and password. Default user name and password is admin/123456. - Page 73 Step 4： IVR images appear.。Default is 4:3 display. Table 3-10.1 System Requirements Intel Core 2 Due above Microsoft Windows 7, Windows Vista, Windows XP SP2 above 4G above VGA Card Needed to support DirectX9.0 (Above) Note 1 Anti-virus soft- The TCP destination port 80 should be available. ware (firewall) Others DirectX 9.0 above...
-
Page 74: App Software Connection (Android For Example)
3-11 APP Software Connection (Android for example) Go “Google Play” or APP store (iOS) to download the “SoCatch”. 2. Press the “New” icon in the upper right corner to add a new connection. 3. Give a Name of this connection and input network address、 port (default:80)、Username (default：admin) and Password (Default ：... - Page 75 5. Multiscreen can be chose in Live view 6. Video quality 、mute and unmute audio 7. Searching by Time or Log files 8. You can search by time or event (log type) in the log search.
- Page 76 9. Highlights in the monthly calendar are those days which has video recording. Pick one of them and choose a start time to watch the recording. 10. Play Rewind、Forward、Pause and Start/Stop 11. Mute and unmute the audio 12. Multiple screen selection...
- Page 77 13. Choose a section of the re- coding and back it down to your device Mark In/out ： Press “Mark In” to set start time and wait for a while then press “Mark Out” to set stop backup time. Go Backup：After set- ting duration channel, press “Calcu-...
- Page 78 16. Backup list：All the backup files should be listed on the backup list. Press any file on the list to execute the file.
-
Page 79: P2P Connection Setup
3-12 P2P Connection Setup How to Setup On your DVR/IVR, please go to Network Setup page: Main control panel => Configuration => Network Setup On lower part of Network Setup page, please input P2P Access Key for P2P and press Apply button. Please press OK button on lower part of Network Setup page and return to Configuration level. - Page 80 For computer use, please login iWatchDVR. On prompting interface, please input P2P Access Key in Host field, input / modify the rest of fields as appropriate Click on Connect button For mobile device (i.e., smart phone and tablet) users, please login APP “Socatch”...
- Page 81 Please scan QR code on DVR’s System Information page Access key information will be shown on Host field Input / modify the rest of fields as appropriate. Click on Save button on upper right corner. Login with new settings...
Need help?
Do you have a question about the IV-MX4POENVR and is the answer not in the manual?
Questions and answers