4-8.4 Spot Setup - Digital ID View IV-411ECO User Manual

Item
Key Tone
Buzzer
Relay

4-8.4 SPOT SETUP

The DVR has two modes of video output; one is main video output, the other is spot video
output. SPOT setup is for controlling the order of channels the system cycles through in SPOT
mode. User can monitor every channel in the SPOT mode.
Item
Channels display in spot for three different modes:
MANUAL:
SPOT MODE
SEQUENCE: Auto-sequence for all channels in order.
EVENT:
The duration time in seconds for the interval between channels under
Interval (Seconds)
SPOT mode.
Skip Video Loss Whether to skip channels without video signal.
Channel
2009.12.14 IV-411ECO/IV-811ECO/IV-1611ECO User Manual V0.4(N02)
Enable/Disable keystrokes tone.
Enable/Disable buzzer operation when the alarm is triggered for
sensor, motion and vloss (Video Loss).
Enable/Disable the signal to be sent to the RELAY OUT blocks
when the alarm is triggered for sensor, motion and vloss.
Description
select channels to display manually.
Display channels with event occurred.
Description
37