4-2.2 Sensor Setup - Digital ID View IV-411ECO User Manual

Item
Mask Mouse Selection
All Area Detection
Mask All Area
Continue
Exit & Save
Exit & Discard

4-2.2 SENSOR SETUP

Item
Sensor Popup Check the box to Enable/Disable popup screen function for all
channels. When Sensor is detected in LIVE mode, the detected
channel image will pop up in full screen display.
All Off Set all sensor off
All Low Set all sensor polarity low
All High Set all sensor polarity high
Click or press ▼ to select between HIGH, LOW voltage for
Sensor Polarity
triggering sensor detection or OFF to turn off polarity for each
channel
Low Polarity：Sensor has not been triggered. When connected,
High Polarity：Sensor has been triggered. When connected, sensor
Off
Note：4CH DVR will display 4 channels and 8CH DVR will display 8 channels.
2009.12.14 IV-411ECO/IV-811ECO/IV-1611ECO User Manual V0.4(N02)
Switch between "select" and "deselect" for cursor-dragging function
Select entire screen as detection area.
Deselect entire detection area.
Continue setup
Save setup and leave
Cancel setup and leave
Description
sensor will be turned on..
status will be turned off..
：Sensor is deactivated, and will not be turned on/off.
Description
24