When The Phone Is Active - Snom D725 User Manual

D 725 | snom 720 User Manual
Function key line
The symbols on the buttons in this line depict the functions that can be activated by pressing the
function key underneath the respective symbol. See "Display symbols and Icons" on page 79 for a
complete list. The factory defaults are:
Outgoing Identity screen: Displays the complete URIs of all active identities.
Reg
1. Press
2. Change the outgoing identity with
3. Press
CHist Call lists (missed, received, and dialed calls). See
CFwd
noFwd
Phone's IP address and URL of snom's web page
Help
Displaying all currently available status messages. If a different function is mapped
Info
onto this key, it will be replaced by this status key whenever a status message becomes
newly available.
Press the key to display the status messages; press
messages one after the other. This will also delete the message in the status bar, for
example call forwarding settings. Once all messages have been deleted, both the
key as well as the message in the info/status bar will disappear.
Info
If you have mapped a different function onto this key, it is now visible and available
again. If you have mapped the function "Status messages" onto the key, the symbol's
space will remain blank until there is a new status message or until a reboot when all
current status messages will be displayed anew.

When the phone is active

The display will inform you of any activity the phone is engaged in. This information is presented in
the form of text or symbols or both.
Info bar: This line contains a description of the current activity, like Connected, Calls on Hold, etc..
Context area
Depending on the activity, this area will contain symbols (incoming call ringing, outgoing call ringing,
etc.) and text like the phone number calling, the extension number being called, conference partners,
etc. See the various descriptions in "Using the phone" on page 44.
In editing modes (i.e., when dialing or editing directory entries), the current editing mode (i.e.,
numerals, small letters, or capital letters) is displayed in the line below the cursor; during active calls
that line will display the duration of the call.
Reg
to show the screen.
.
Forwarding all calls (on/off). See
.
Del
27
Getting to Know Your Phone
to delete displayed status