Connection Debugging - Aaeon AGD-317R User Manual

R e m o t e T o u c h D i s p l a y
2.11 Connecting Debugging
If the connection or display cannot work well, please refer to the debugging
steps below.

Make sure all of the cabling connected tightly

After the computer/display powers on, you will see the display is
reaching the local and remote IP below

Local IP: The IP address of the display
If the display cannot find the local IP as shown, it means the
network connection/cabling has some issues

Remote IP: The address of the remote box, such as ACG-203
or ACG-204
If the display cannot find the remote IP, it means the remote
box may have some issues, so the IP address in the remote
box cannot be found

Below is the situation, which is searching the IP address

If the display or sound cannot work properly, please try the following
step
Step1: Make sure the local and remote IP can be found. If the IP
address cannot be found, please check the network cabling
Step 2: Make sure the DVI/VGA and audio cable insert tightly
A G D - 3 1 7 R
Chapter 2 Hardware Installation
2-13