Connecting Power Of Remote Display; Connecting I/O Connectors Of Remote Display - Aaeon AGD-317R User Manual

R e m o t e T o u c h D i s p l a y

2.9 Connecting Power of Remote Display

To power on the LCD monitor, use the provided AC-DC adapter and the
power cord to connect to the power output socket of the monitor. Fasten
the connections securely.
A "Surge Protection" device plugged between the AC-DC adapter and the
wall outlet is recommended to prevent the effects of sudden current
variations from reaching the LCD monitor. The sudden peaks of electricity
may harm the LCD monitor.

2.10 Connecting I/O Connectors of Remote Display


Turn off the computer and the LCD monitor before connecting them.

Use the RJ-45 CAT5/6 cable to connect to the RJ45 connector.

Connect USB devices to the USB connectors.
Chapter 2 Hardware Installation
2-12
A G D - 3 1 7 R