Table of Contents
Advertisement
Injector table
Gas categories
Gas
Model
Pressure
Injector
KSOX
9020
Heat input (Hs)
IMPORTANT: When changing the gas cylinder, it should be carried out away from any source of ignition.
Check for gas leaks
Do this immediately after the gas is connected and every time the appliance is reconnected after it has not
been used for some time.
Once the rubber pipe is connected to the gas supply, proceed as follows:
1) Open the gas valve on the LPG cylinder (or turn the ON-OFF tap for methane supply).
Conversion from LP gas to nature gas (only for some countries - see rating label)
WARNING
Explosion Hazard
Use approved "outdoor" gas supply line.
Securely tighten all gas connections.
Failure to do so can result in explosion, or fire.
IMPORTANT: A chain should be fixed between the wall where the barbecue hose is connected and the
barbecue. This chain should be shorter then the hose, so the hose cannot become loose when moving the
barbecue.
This BBQ must be installed and/or used outdoor or in an amply ventilated area, it must have at least 25%
of the surface (sum of the walls surface) area open.
IMPORTANT: This installation must conform with local codes and ordinances and made by qualified
technician (Servicing Center).
A combination of pipe fittings must be used to connect the grill to the existing gas line.
I2E+
G20
20mbar
Main grill
1.90mm
Back
1.57mm
burner
Side
1.55mm
burner
28.6 kW
I3B/P(30),
I3+(28-30/37)
G25
G30
25mbar
29mbar
1.90mm
1.27mm
1.57mm
1.01mm
1.55mm
1.01mm
28.6 kW
28.6 kW
13
I3B/P(50)
G31
G30
37mbar
50mbar
1.27mm
1.08mm
1.01mm
0.86mm
1.01mm
0.86mm
28.6 kW
28.6 kW
I2H
G20
20mbar
1.90mm
1.57mm
1.55mm
28.6 kW
Advertisement
Table of Contents
