Table of Contents
Advertisement
Important safety instructions
DISPOSAL FOR PACKING MATERIAL
The packing material is 100% recyclable and is marked with the recycle symbol
of the packing must therefore be disposed of responsibly and in full compliance with local authority
regulations governing waste disposal.
Scrapping the product
• This appliance is marked in compliance with European Directive 2002/96/EC, Waste Electrical and
Electronic Equipment (WEEE).
• By ensuring this product is disposed of correctly, you will help prevent potential negative consequences
for the environment and human health, which could otherwise be caused by inappropriate waste
handling of this product.
• The symbol on the product or on the accompanying documentation indicates that it should not be
treated as domestic waste but must be taken to an appropriate collection centre for the recycling of
electrical and electronic equipment.
THE RATING PLATE, WITH THE TECHNICAL DATA, THE SERIAL NUMBER AND THE MARKINGS IS
POSITIONED WHERE YOU CAN SEE IT ON THE BACK OF THE APPLIANCE. NEVER REMOVE THE
PLATE.
Installation requirements
Tools and Parts
Freestanding Outdoor Grills
Gather the required tools and parts before starting installation.
Read and follow the instructions provided with any tools listed here.
Tools Needed
• Tape measure
• Small, flat-head screwdriver
• Flat-head screwdriver
• Phillips screwdriver
• Level
• Wrench or pliers
• Pipe wrench
• Scissors or cutting pliers (to remove tiedowns)
• Noncorrosive leakdetection solution
Location requirements
Parts Needed
• 10 kg (cylinder not more than 50 cm) LP gas fuel tank.
WARNING
Do not move the appliance during use.
WARNING
Explosion Hazard
Do not store fuel tank in a garage or indoors.
Do not store grill with fuel tank in a garage or indoors.
Failure to follow these instructions can result in explosion, or fire.
6
. The various parts
Advertisement
Table of Contents
