Climb Mill Assembly Steps - Matrix C7xi-03 Service Manual

CHAPTER 10: Climb mill SPECifiCATioNS ANd ASSEmbly gUidE

10.3 Climb mill ASSEmbly STEPS

STEP 1 - blACk HARdwARE bAg
1) Open the Black hardware bag.
2) Carefully route the wires up the console mast.
3) Attach the console mast to the frame using the provided bolts. Secure tightly being careful not to pinch any wires.
138
CHAPTER 10: Climb mill SPECifiCATioNS ANd ASSEmbly gUidE
10.3 Climb mill ASSEmbly STEPS - CoNTiNUEd
STEP 2 - blUE & gREEN HARdwARE bAgS
1) Open the Blue and Green hardware bags.
2) Attach the Lower Handlebar using the provided bolts. Tighten securely at the base and mast.
3) Attach the Upper Handlebar using the provided bolts. Carefully route and connect all wires to the console mast. Tighten securely.
4) Attach the bottle holders to the upper handlebar using the provided bolts.
5) Repeat on the opposite side.
UPPER HANDLEBAR
BOTTLE HOLDER
CURVED WASHER x2
GREEN BAG
CURVED WASHER x2
139