Table of Contents
Advertisement
Press the OK button, then UP/DOWN button. The display shows one of the numbers from 1
4.
to 5 (The maximum call barring numbers you can set), and then key in the telephone
number you want to set call barring
Press OK button, then the display shows HS?
5.
Key in the handset number that you want to set call barring
Press OK button to confirm
6.
To delete call barring number
Press MENU button then UP/DOWN button until the display shows BASE SET
1.
Press the OK button, the display shows PIN?
2.
3. Key in your PIN number
Press the OK button, then UP/DOWN button to the location BARRING
4.
Press the OK button, the display shows the call barring number you set.
5.
Press the CLEAR button to delete the number
6.
Press OK button to confirm
7.
Base Melody
You have a choice of nine ringing melodies for the base unit
Press MENU button then UP/DOWN button to the location BASE SET
1.
Press OK button and Key in the PIN number
2.
Press OK button then UP/DOWN button to the location B MELODY
3.
Press OK button and press UP/DOWN button to change the melody
4.
Press the OK button to confirm the melody you chosen
5.
Base Volume
You have a choice of five volume levels (0 – 4)
Press MENU button then UP/DOWN button to the location BASESET
1.
Press OK button and Key in the PIN number
2.
Press OK button then UP/DOWN button to the location B VOLUME
3.
The display shows the current volume level
Press UP/DOWN button to change the volume
4.
Press the OK button to confirm the volume level you chosen
5.
Least cost route (LCR) function (Optional)
With the LCR function, the phone will automatically replace a long number (up to 11 digits) with a
comparative short number (up to 3 digits), to simplify the process of dialing a long number.
Example:
If you program to replace "00" with "17909", whenever you dial a number beginning with
the"00",the phone will automatically change this to "17909". If he dials "00 15151500", the phone
will automatically replace the number to be dialed out as "17909 15151500"
Note:
LCR function only replaces the prefix of the phone number you dial.
To set LCR:
Press MENU button then UP/DOWN button to the location BASE SET
1.
Press the OK button, the display shows PIN?
2.
Key in your PIN number and press the OK button, then UP/DOWN button to the location
3.
LCR
Press the OK button, the display shows SHORT?
4.
Press the OK button, the display shows EMPTY, key in the short number you want to
5.
replace the long number directly
12
Advertisement
Table of Contents
