Your Handset Name; Base Setting - Denver DDP-650 Triple User Manual

Press the MENU button, then press UP/DOWN button to the location HANDSET
1.
Press the OK button, then press UP/DOWN button to the location EXT RING / INT RING
2.
Press the OK button
3.
The display shows the current melody
Press UP/DOWN button to change the melody
4.
Press the OK button to confirm the melody you want
5.
Display language
You can select the language from the menu up to your preference:
Press the MENU button then press UP/DOWN button to the location HANDSET
1.
Press the OK button then press UP/DOWN button again to the location LANGUAGE
2.
3. Press the OK button.
The display shows the current language
Press UP/DOWN button to the language you prefer
4.
Press the OK button to confirm
5.

Your handset name

Press the MENU button, then press UP/DOWN button to the location HANDSET
1.
Press the OK button, then press UP/DOWN button to the location SET NAME
2.
Press the OK button. The display shows the current name
3.
Press the CLEAR button repeatedly to clear the display, then key in your chosen name
4.
5. Press the OK button to confirm
Auto Talk
Normally, you need to press the CALL button to answer an incoming call. But with AUTOTALK
turned on, when your handset is resting on the base unit and it rings for an incoming call, you can
answer the call by simply lifting the handset. To turn auto-talk ON/OFF:
Press the MENU button then UP/DOWN button to HANDSET
1.
Press the OK button then UP/DOWN button to AUTOTALK
2.
Press the OK button again, the display shows ON? / OFF
3.
Press the OK button to confirm
4.
! If you have turned auto-talk on, do not press the CALL button after you've answered a call by
lifting the handset, otherwise, you'll disconnect the call.
To Lock /Unlock the keypad
Press MENU button and "

BASE SETTING

Note: The default PIN is: 0000
Call Barring Function
Call barring enables you to restrict or bar certain types of calls from your phone.
To set call barring number
Press MENU button then UP/DOWN button until the display shows BASE SET
1.
Press the OK button, the display shows PIN?
2.
Key in your PIN number and press the OK button, then press UP/DOWN button to the
3.
location BARRING
" button consecutively to lock or unlock the keypad.
11