Identification numbers record
Outboard motor serial number
The outboard motor serial number is
stamped on the label attached to the port
side of the clamp bracket or the upper part of
the swivel bracket.
Record your outboard motor serial number in
the spaces provided to assist you in ordering
spare parts from your Powertec dealer or for
reference in case your outboard motor is sto-
len.
1
1. Outboard motor serial number location
Key number
If a main key switch is equipped with the mo-
tor, the key identification number is stamped
on your key as shown in the illustration.
Record this number in the space provided for
General information
reference in case you need a new key.
1. Key number
Safety information
Before mounting or operating the outboard
motor, read this entire manual. Reading it
should give you an understanding of the
motor and its operation.
Before operating the boat, read any own-
er's or operator's manuals supplied with it
and all labels. Be sure you understand
each item before operating.
Do not overpower the boat with this out-
board motor. Overpowering the boat could
result in loss of control. The rated power of
the outboard should be equal to or less
than the rated horsepower capacity of the
boat. If the rated horsepower capacity of
the boat is unknown, consult the dealer or
boat manufacturer.
Do not modify the outboard. Modifications
could make the motor unfit or unsafe to
use.
Incorrect propeller selection and incorrect
use may not only cause engine damage,
but also adversely affect fuel consumption.
1