Table of Contents
Advertisement
3.
Place the throttle grip in the "
(start) position. After the engine starts,
return the throttle to the fully closed po-
sition.
4.
Pull out / turn the choke knob fully. After
the engine starts, replace / return the
knob to the home position.
NOTE:
It is not necessary to use the choke when
starting a warm engine.
If the choke knob is left in the "
(start) position while the engine is running,
the engine will run poorly or stall.
5.
Push the starter button to start the mo-
tor. (Repeat if necessary.)
"
6.
Immediately after the engine starts, re-
lease the starter button to allow it to re-
turn to its original position.
7.
Slowly return the throttle grip to the fully
closed position so that the engine does
not stall.
CAUTION:
Never push the starter button while the
engine is running.
Do not keep the starter motor turning
for more than 5 seconds. If the starter
motor is turned continuously for more
than 5 seconds, the battery will be
quickly discharged, thus making it im-
possible to start the engine. The starter
can also be damaged. If the engine will
not start after 5 seconds of cranking,
release the starter button, wait 10 sec-
onds, then crank the engine again.
Operation
"
23
Advertisement
Table of Contents
