Table of Contents
Advertisement
NOTE:
The start-in-gear protection device prevents
the engine from starting except when in neu-
tral.
2.
Attach the engine stop switch lanyard to
a secure place on your clothing, or your
arm or leg. Then install the lock plate on
the other end of the lanyard into the en-
gine stop switch.
WARNING
Attach the engine stop switch lanyard
to a secure place on your clothing, or
your arm or leg while operating.
Do not attach the lanyard to clothing
that could tear loose. Do not route the
lanyard where it could become entan-
gled, preventing it from functioning.
Avoid accidentally pulling the lanyard
during normal operation. Loss of en-
gine power means the loss of most
steering control. Also, without engine
power, the boat could slow rapidly. This
could cause people and objects in the
boat to be thrown forward.
N
3.
Place the throttle grip in the "
(start) position.
4.
Pull out / turn the choke knob fully. After
the engine starts, replace / return the
knob to the home position.
NOTE:
It is not necessary to use the choke when
starting a warm engine.
If the choke knob is left in the "
(start) position while the engine is running,
Operation
"
"
21
Advertisement
Table of Contents
