Manual Starter Handle; Starter Button; Main Switch; Steering Friction Adjuster - PowerTec 25A Owner's Manual

Outboard motor
Table of Contents

Advertisement

Manual starter handle

To start the engine, first gently pull the han-
dle out until resistance is felt. From that posi-
tion, then pull the handle straight out quickly
to crank the engine.

Starter button

To start the engine with the electric starter,
push the starter button.
Basic components

Main switch

The main switch controls the ignition system;
its operation is described below.
" (off)
"
With the main switch in the "
tion, the electrical circuits are off, and the key
can be removed.
" (on)
"
With the main switch in the "
tion, the electrical circuits are on, and the key
cannot be removed.
" (start)
"
With the main switch in the "
sition, the starter motor turns to start the en-
gine. When the key is released, it returns
automatically to the "

Steering friction adjuster

A friction device provides adjustable resis-
tance to the steering mechanism, and can be
set according to operator preference. An ad-
justing screw or bolt is located on the swivel
bracket.
" (off) posi-
" (on) posi-
" (start) po-
" (on) position.
11

Advertisement

Table of Contents
loading

This manual is also suitable for:

30a

Table of Contents