Stopping Engine; Procedure - PowerTec 25A Owner's Manual

Operation
2. Pull up the neutral interlock trigger (if
equipped) and move the remote control
lever quickly and firmly from neutral to
reverse.

Stopping engine

Before stopping the engine, first let it cool off
for a few minutes at idle or low speed. Stop-
ping the engine immediately after operating
at high speed is not recommended.

Procedure

1. Push and hold the engine stop button or
turn the main switch to "
28
2.
" (off).
3.
ON
OFF
After stopping the engine, disconnect
the fuel line if there is a fuel joint on the
outboard motor.
Tighten the air vent screw on the fuel
tank cap (if equipped).
START