Table of Contents
Advertisement
4.
Open the throttle slightly without shifting
using the neutral throttle lever or free ac-
celerator. You may need to change the
throttle opening slightly depending on
engine temperature. After the engine
starts, return the throttle to the original
position.
N
NOTE:
On remote controls equipped with a neu-
tral throttle lever, a good starting point is to
lift the lever just until you feel resistance,
then lift slightly more.
The neutral throttle lever or free accelera-
tor can only be used when the remote con-
trol lever is in neutral.
5.
Press in and hold the main switch to op-
erate the remote choke system. The re-
mote choke switch automatically returns
to its normal position when you release
your hand. Therefore keep the switch
pressed in.
NOTE:
It is not necessary to use the choke when
starting a warm engine.
Push in the main switch fully, or the remote
choke system will not operate.
ZMU02314
6.
Turn the main switch to "
and hold it for a maximum of 5 seconds.
7.
Immediately after the engine starts, re-
lease the main switch and allow it to re-
turn to "
CAUTION:
Never turn the main switch to "
(start) while the engine is running.
Do not keep the starter motor turning
for more than 5 seconds. If the starter
motor is turned continuously for more
than 5 seconds, the battery will be
quickly discharged, thus making it im-
possible to start the engine. The starter
Operation
ON
OFF
ON
OFF
" (on).
START
" (start),
START
"
25
Advertisement
Table of Contents
