PowerTec 25A Owner's Manual page 42

Maintenance
Bore × stroke:
72.0 × 61.0 mm (2.83 × 2.40 in)
Ignition system:
CDI
Spark plug (NGK):
25A B7HS-10
25A B7HS-10
30A B8HS-10
30A B8HS-10
30A B8HS-10
25A B7HS-10
30A B8HS-10
Spark plug gap:
0.9–1.0 mm (0.035–0.039 in)
Control system:
25ATiller
25A Remote control
30A Tiller
30A Remote control
30A Tiller
25A Tiller
30A Tiller
Starting system:
25A Manual
25BW Manual and electric
30AA Manual
30A Manual and electric
30A Manual and electric
25A Manual
30A Manual
Starting carburetion system:
Choke valve
Min. cold cranking amps (CCA/EN):
25A 347.0 A
30A 347.0 A
30A 347.0 A
Min. rated capacity (20HR/IEC):
25A 40.0 Ah
30A 40.0 Ah
30A 40.0 Ah
Alternator output:
36
25A 80 W
30A 80 W
25A 80 W
30A 80 W
Alternator output for battery DC:
25A 6.0 A
30A 6.0 A
30A 6.0 A
Drive unit:
Gear positions:
Forward-neutral-reverse
Gear ratio:
2.08 (27/13)
Trim and tilt system:
Manual tilt
Propeller mark:
F
Fuel and oil:
Recommended fuel:
Regular unleaded gasoline
Fuel tank capacity:
24 L (6.34 US gal) (5.28 Imp.gal)
Recommended engine oil:
POWERLUBE 2-stroke outboard motor
oil
Fuel:oil ratio:
Regular gasoline:
50 :1
Lubrication:
Pre-mixed fuel and oil
Recommended gear oil:
Hypoid gear oil SAE#90
Gear oil quantity:
3
320.0 cm (10.82 US oz) (11.29
Imp.oz)
Tightening torque for engine:
Spark plug:
25.0 Nm (18.4 ft-lb) (2.55 kgf-m)
Propeller nut:
35.0 Nm (25.8 ft-lb) (3.57 kgf-m)