Table of Contents
Advertisement
cident and personal injury.
Return the outboard motor to its normal
position as soon as the boat is back in
deeper water.
CAUTION:
Do not tilt the outboard motor up so that
the cooling water inlet on the lower unit is
above the surface of the water when set-
ting up for and cruising in shallow water.
Otherwise severe damage from overheat-
ing can result.
Procedure
1.
Place the gear shift lever in neutral.
N
N
2.
Push the tilt lock lever down to the re-
lease position.
3.
Slightly tilt the outboard motor up and
pull the shallow water lever toward the
transom.
4.
To return the outboard motor to the nor-
mal position, place the gear shift lever in
neutral, then slightly tilt the outboard
motor up. Push the shallow water lever
down. Set the tilt lock lever to the lock
Operation
33
Advertisement
Table of Contents
