Ten-Haaft Oyster Operating Instructions Manual page 43

Hide thumbs Also See for Oyster:
Table of Contents

Advertisement

To access the menu of the Oyster/CARO/Cosmo system, press MENU
and P+/P— to select Oyster/CARO/Cosmo Digital. Press OK to open the
menu.
To select the individual menu items, use P+/P- and confirm with OK as
usual. All search functions and the required settings are controlled via
the Oyster/CARO/Cosmo Digital menu. To enhance your operating
convenience, many functions are performed automatically.
For example, the antenna is automatically opened and moved into the
previous reception position any time you switch on the system. If no
image is received in this position, the automatic search function is
started. Ensure that the moving antenna cannot cause harm to any
person before switching on the system.
When the system is switched off with the red stand-by key
or the
keys at the satellite mouse, the antenna is automatically retracted. The
antenna is also retracted when you switch on the ignition of your
vehicle to start the engine. The antenna retracts in only a few seconds.
Never drive off before the antenna is fully retracted and the receiver
has been switched off.
Before driving off, always perform a visual check of the vehicle roof
to ensure that the antenna is correctly retracted into its park
position. The indicator must only show a green stand-by dot or must
be completely blank, depending on the settings.
Please note that by switching off the master switch, the system is
completely disconnected from the vehicle's electrical system and that
the antenna will hence not be able to retract automatically.
Please also note that the system can only be switched back from the
power-saving stand-by mode by pressing both keys of the satellite
mouse simultaneously. If you suspect a malfunction of your system,
then first press both keys of the satellite mouse.
43

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents