Ten-Haaft Oyster Operating Instructions Manual page 27

Multi-channel operation
During the recording of a program, other channels transmitted on the
same transponder can be directly played back without interrupting the
running recording. To view such channels while a program is being
recorded, exit the PVR menu by pressing EXIT (the recording is
continued in the background) and then press LIST. A channel list is
displayed containing all channels available for selection.
One restriction may apply: When playing back or recording encrypted
channels, the decoder module may not be able to decode two programs
at the same time.
To stop the recording in the background, reactivate the PVR menu by
pressing the PVR key.
PC connection (USB 2.0)
If the PVR menu is shown on screen but neither the playback nor the
recording function is active, the hard disk can be controlled by a
personal computer connected to the "HD" port (USB 2.0) by pressing
"8"
key . This function must be confirmed by pressing OK. The computer
will maintain control over the hard disk until the PVR key is pressed
again. Press OK to confirm that the control of the hard disk is passed
back to the receiver.
When the hard disk is controlled by a computer via the USB 2.0 port,
programs stored on the hard disk can be downloaded if suitable
software is installed.
The following software (examples) is suitable to download and edit
recorded programs:
DVR-Studio PRO (www.haenlein-software.de)
DigeniusDiskX (www.sourceforge.net/projects/digeniusdisk)
27