Ten-Haaft Oyster Operating Instructions Manual page 33

Note that all satellites can be received as long as you do not change
any settings. If you change any of the settings, the reception of
unlisted satellites will be suppressed.
The channel list will be updated as required when new satellites are
installed in orbit. This list can be downloaded from the Internet and
uploaded into the receiver by a computer (see page 57).
Updated lists are available for download at www.ten-haaft.com
Edit Settings Signal Output
TV Screen: Here you can adjust your system to wide-screen television
sets with a 16:9 aspect ratio. For mobile applications, sets with a 4:3
aspect ratio are primarily used.
RGB/YUV: This option allows the selection of the YUV composite signal
as an alternative to the default RGB signal. The RGB or YUV signal is
supplied to the SCART port and also to the correspondingly identified
coloured Cinch jacks. Please refer to the operating manual of your TV
set to determine which signal type is supported. The signal of the CVBS
and Y/C ports and the CVBS signal at the SCART port are not affected
by this setting. The Cinch jacks RGB/YUV are not provided in some
design variants.
Volume Bypass: This menu item deactivates the volume control. With
the default setting "Off", the volume of the television set can be
adjusted with the digital CI receiver's remote control.
Digital Audio: Here, you can select which digital audio formats are
output via the SPDIF port. Please only select formats that are
compatible with the audio devices connected. The selection of the
audio format output to this port depends on the formats transmitted
by the stations (e.g. Dolby 5.1). The desired audio channel can then be
selected via the sub-channel selection (see page 19).
33