Tablet And Driver Installation; Installation; Connecting The Tablet - HP ImagePad User Manual

Chapter 2

Tablet and Driver Installation

Installation

Installation of the tablet is comprised of few
steps and designed to be as easy as possible. The
following instructions walk you through connecting
the tablet to your computer and installing the
drivers.

Connecting the tablet

Before you connect the tablet, determine which
type of keyboard port you have. You need to choose
the correct keyboard connector to use with this
installation. Newer systems use the smaller, Mini-
DIN connector for the keyboards, while previous
systems use the larger connector.
Note: As a safety precaution, the power to the
computer should be off before attaching any new
device.
To connect the tablet:
1. Turn off the power to your computer.
2. Once you've determined which keyboard connector
to use, plug it into the small, round socket on
the serial connector.
3. Attach the serial connector to an available
serial port. Use the 25- to 9-pin adapter if
necessary.
4. Unplug your keyboard from the port on your
computer, and attach it to the female port on
the keyboard connector. Plug the male end of
2-1