Forced Intercom Tone Ring - Tadiran Telecom Emerald ICD Deluxe User Manual

Forced Intercom Tone Ring

4.11
*
Feature Code:
Description
You can use the Forced Intercom Tone Ring feature to cause the called telephone to
ring when you initiate an intercom call. After a Voice Announce connection has
been established to an extension, you may change the alert signal at that extension
from Voice Announce to Tone Ring.
1. Establish an intercom call to an extension in Voice Announce mode. Your
telephone will display:
*
2. Press
Announce to Tone Ring. Your telephone will display:
3. A Tone Ring alert signal is sent and continues at the called extension until it
is answered. If your call remains unanswered, you can dial
return to Voice Call Announce mode.
Operational Notes
• It is not possible to force an extension from Tone Ring mode to Voice Announce
mode if Tone Ring was selected in the destination.
• To leave a Callback request at a called extension that doesn't answer, the alert
signal must be set for Tone Ring.
VOICE CALL xx
msg
to change the alert signal at the called extension from Voice
CALLING STA 10
cbck msg
Emerald ICE Deluxe Telephone User Guide
*
again to
4-13