Audio Setup; Speaker Setting - Kenwood KDC-X792 Instruction Manual

Audio Adjustments
Audio Setup
You can set Sound system, such as follows;
Front High Pass Filter "HPF-F"
Speaker Setting
Fine-tuning so that the System
Q
value is optimal
when setting the speaker type as follows;
Rear High Pass Filter "HPF-R"
Low Pass Filter "LPF"
OFF "OFF"
~-------
For 5 & 4in. speaker "S/4inch"
- - - - - ' - - - - -
For 6 & 6x9 in. speaker "6x9/6inch"
--=-Fo-rt-:-he-=O--=-EM-sp..Lea-ke-r- - "O.E.M."
*1
KDC-X792/X692 only.
~
~
• Volume offset: Sets each source's volume as a difference
from the basic volume.
• Loudness: Compensates for low and high tones during
low volume. (Only the low tone is compensated for
when the tuner is selected as a source.)
Dual Zone System
Main source and sub source (Auxiliary input) output
Front channel and Rear channel separately.
- Set up the channel of sub source by "Zone2" of
<Function Control> (page 6).
- Select Main source by [SRC] button.
- Adjust the volume of Front channel by [AUD] knob.
- Adjust the volume of Rear channel by <Audio Control>
(page 23) or
[AJ/[OY]
button on the remote control
(page 28).
- The Audio Control has no effect on sub source.
1
Select the source to adjust
For how to select source item, refer to <Power/
Source Select button> of <Basic Operation> (page
4).
2
Enter Audio Setup mode
Press the lAUD] knob for at least 1 second.
3
Select the Audio Setup item to adjust
Press the lAUD] knob.
4
Adjust the Audio setup item
Turn the lAUD] knob.
S
Exit Audio Setup mode
Press the lAUD] knob for at least 1 second.
1
Enter Standby
Select the "STANDBY" display.
For how to select source item, refer to <Power/
Source Select button> of <Basic Operation> (page
4).
2
Enter Speaker Setting mode
Press the lAUD] knob.
"SP SEL' is displayed.
3
Select the Speaker type
Turn the lAUD] knob.
4
Exit Speaker Setting mode
Press the lAUD] knob.
24
I
KDC-X792/KDC-X692/KDC-MP738U/KDC-MP638U