G-Analyzer Operation; G-Analyzer Control; G-Analyzer Vehicle Setup - Kenwood KDC-X792 Instruction Manual

Function of KDC-X792
G-Analyzer Operation
G-Analyzer Control
You can adjust following G-Analyzer Control items;
- - -
>
"GMENU" G- Graphic/ Downloaded G-Analyzer display
G-Graphic*l/ G-Meter*l/ Selection
G-Counter*l
- - - - -
>
"GMA"
>
"STOP. (page 13) G-Analyzer Stop Watch
W"
>
"GMA"
>
"HP
SET"*
* Can be set in standby state.
*1 G-Graphic can be switched to customized pictures. Refer
to <Picture downloading> (page
21).
*2The value of G-Meter display and G-Counter display can
be reset by <G-Analyzer Reset> (page 14).
*3 Calibrating G-Point. Setting the level according to the
kinds of vehicles. In the case of driving situations calling
for few accelerations, set the G-Point up to
"Levell'~
In
the case of frequent accelerations, set it up to "LeveI3".
1
Enter Display Control mode (In Display Type
F)
Select
"DISP'~
For how to select Function Control item, refer to
<Function Control> (page 6).
2
Enter G-Analyzer item mode
Turn the Control knob or push it towards left
or right.
Press the Control knob.
3
Select the G-Analyzer item you want to set
Turn the Control knob or push it towards left
or right.
4
Exit G-Analyzer item mode
Press the Control knob.
In Standby mode
G-Analyzer Vehicle Setup
Enter vehicle weight or class to calculate
horsepower.
1
Enter G-Analyzer vehicle weight setup
mode (In Display Type F)
Select "DISP" > "GMA"
>
"HP SET"
> "WEIGHT'~
For how to select Function Control item, refer to
<Function Control> (page 6).
"WEIGHT INPUT" is displayed.
2
Enter weight input
- -
Select the weight numbers Turn the Control knob.
Select the digits to enter Push the Control knob towards right
or left.
3
Exit G-Analyzer vehicle wight setup mode
Press the Control knob.
4
Enter G-Analyzer vehicle class setup mode
Select "DISP"
>
"GMA"
>
"HP SET"
>
"CLASS'~
"CLASS SELECT" is displayed.
5
Select vehicle class
Turn the Control knob.
"Mid Size"/ "Full Size"/ "SUV"/ "Van/ Mini-Van"/
"Pickup Truck"/ "Sporty"/ "Compact"
6
exit G-Analyzer vehicle class setup mode
Press the Control knob.
12
I
KDC-X792/KDC-X692/KDC-MP738U/KDC-MP638U