Replacing The Radiants - Valor Black Beauty Radiant 340 Owner's Manual

Figure 4 Replacing radiant
See figure 4.
Always use the correct type of replacement radiant. Ask for Valor part number
0544649 (GC No. 125 164).
Turn the fire off and allow it to cool before attempting to remove the radiants.
•
Remove the dress guard by pressing down the two hooks at the top. Tilt the guard
•
forward and lift out.
Lift the radiant upwards to clear the metal retaining bar then pull out bottom first.
•
Fit the new radiant by inserting its top under the top lip of the radiant box then swing
•
the bottom of the radiant over and behind the retaining bar. It is important that the
back face of the radiant should rest against the rear ribs in the firebox. There will
be a small gap between the bottom front edge of the radiant and the retaining bar.
Replace the dress guard. Locate the bottom of the dress guard in the two holes in the
•
bottom apron. Push the guard back so that the two spring projections at the top of the
guard engage in the slots under the hood.
OWNER'S GUIDE

REPLACING THE RADIANTS

Page 8