Assembly Instructions - Kärcher HD 2.8/10 ST Ed B Operator's Manual

Spray
Safety
Latch
High Pressure
Hose
STEP 1: Attach the high pressure
hose to the spray gun using teflon
tape on hose threads. Use safety
latch to prevent from opening.
Inlet
Fitting
STEP 5: Connect the high pressure hose to the outlet
discharge fitting. Push coupler collar forward until secure.
Connect the garden hose to pump water inlet. Inspect
inlets. CAUTION: Do not run the pump without water
or pump damage will result.

ASSEMBLY INSTRUCTIONS

Gun
STEP 2: Connect garden hose
to the cold water source. Before
installing nozzle, turn on water
supply and run machine, allowing
water to flush through the system
until clear.
Outlet Fitting
9.800-086.0 • Rev. 7/10
Nozzle
Coupler
STEP 3: Insert nozzle into coupler.
Release the coupler collar and push
the nozzle until the collar clicks. Pull
the nozzle to make sure it is seated
properly.
7