Sun Oracle Blade X4-2B Service Manual page 168

BIOS I/O Menu Selections
I/O Setup Options
EM 1
IO Enable
OpROM Enable
Maximum Link
Speed
PCI Hot-Plug
Settings
PCI Buses Padding
I/O Resources
Padding.
MMIO 32 bit
Resources Padding.
PFMMIO 32 bit
Resources Padding.
Legacy iSCSI
Launch Legacy
iSCSI
168 Sun Blade X4-2B Service Manual • March, 2014
Options Defaults Description
Disabled/ Enabled Enable or disable I/O for the add-in card.
Enabled
Disabled/ Enabled Enable or disable Option ROM for the add-in card.
Enabled
Displays speed as [GEN2 (De-Emph=1 -3.5 dB]
Change PCI Express and standard HP controller settings.
If enabled allows BIOS built in hot-plug support. Use this
feature if OS does not support PCI Express and SHPC hot-plug
natively.
Use this feature to enable or disable PCI Hot-Plug Settings:
BIOS Hot-Plug Support
PCI Buses Padding
I/O Resources Padding
MMIO 32 bit Resources Padding
PFMMIO 32 bit Resources Padding
Disabled/ Disabled Use this feature if OS does not support PCI Express and SHPC
Enabled hot-plug natively.
8 k Use this feature if OS does not support PCI Express and SHPC
hot-plug natively.
32 M Use this feature if OS does not support PCI Express and SHPC
hot-plug natively.
32 M Use this feature if OS does not support PCI Express and SHPC
hot-plug natively.
Configure the iSCSI parameters.
Disabled/ Disabled Enable or disable iSCSI for the add-in card.
Enabled